Dentalcon

• 2 x 1.3 MP cameras, Red Laser
• Accuracy: 10 μm (ISO)
• Die scan time: 35 sec
• Full arch scan time: 90 sec
• Impression scanning

• 2 x 1.3 MP cameras, Blue LED
• Accuracy: 10 μm (ISO) / 12 μm (Implant bar)
• Die scan time: 25 sec
• Full arch scan time: 55 sec
• Extended interior and multi-die scanning
• Impression scanning

• 2 x 5 MP cameras, Blue LED
• Accuracy: 7 μm (ISO) / 8 μm (Implant bar)
• Die scan time: 25 sec
• Full arch scan time: 55 sec
• Extended interior and multi-die scanning
• Texture scanning
• Impression scanning

• 4 x 5 MP cameras, Blue LED
• Accuracy: 7 μm (ISO) / 8 μm (Implant bar)
• Die scan time: 15 sec
• Full arch scan time: 35 sec
• Color texture scanning
• Extended interior and multi-die scanning
• Impression scanning

• 4 x 5 MP cameras, Blue LED Multi-line
• Accuracy: 5 μm (ISO) / 8 μm (Implant bar)
• Die scan time: 15 sec
• Full arch scan time: 20 sec
• Color texture scanning
• No need for separate die scan*
• Impression scanning

• 4 x 5 MP cameras, Blue LED Multi-line
• Accuracy: 5 μm (ISO) / 8 μm (Implant bar)
• Die scan time: 15 sec
• Full arch scan time: 20 sec
• Color texture scanning
• No need for separate die scan *
• All-in-one scanning: room for 2 models
• Impression scanning

• Low-cost professional start-up
• 4-axis geometry
• Automatic tool change and measurement
• All indications – including fully contoured restorations
• Including CAM software

• Five-axis simultaneous milling
• Automated system with integrated 8-disc material changer
• Synchronous spindle with a maximum speed of 60,000 rpm and four hybrid ball bearings
• 16-position tool changer with automatic tool measurement and replacement tool management system
• Absolute precision: repeatability value of ± 0,003 mm
• Inclination angle of the rotation axes ± 180° (A-axis) and ± 30° (B-axis)
• Benchtop model with very small footprint

• Five-axis simultaneous milling
• Automated system with integrated 8-disc material changer
• Synchronous spindle with a maximum speed of 60,000 rpm and four hybrid ball bearings
• 16-position tool changer with automatic tool measurement and replacement tool management system
• Absolute precisio:
  repeatability value of ± 0,003 mm
• Inclination angle of the rotation axes ± 180° (A-axis) and ± 30° (B-axis)
• Wet operation
• Benchtop model with very small footprint

The Zenostar system is composed of an integrated portfolio of materials for the creation of customized restorations made of zirconium oxide. Zenostar accommodates a wide range of processing options and therefore offers great flexibility in the fabrication of dental restorations.

State-of-the-art methods such as the Zenotec^® CAD/CAM technique involve efficient working procedures and ensure reproducible results. Zenostar discs are made from highquality raw materials using advanced manufacturing methods. The resulting material satisfies the most discerning requirements.

Download the Zenostar brochure

State-of-the-art methods such as the Zenotec^® CAD/CAM technique involve efficient working procedures and ensure reproducible results. Zenostar discs are made from highquality raw materials using advanced manufacturing methods. The resulting material satisfies the most discerning requirements.

Zenotec Materials:

•  ProArt Wax Disc for Zenotec Yellow
• ProArt Wax Disc for Zenotec Blue
• ProArt Wax Disc for Zenotec Pink
• IvoBase® CAD for Zenotec
• Tray Disc for Zenotec
• Telio CAD for Zenotec
• Zenotec PMMA Cast
• Zenotec Model
• Zenotec Ti
• Zenotec Ti pur
• Zenotec NP
• Zenotec Titanium bases

Computer-assisted dentistry is increasingly gaining in importance. Cost-effective CAD/CAM procedures, digitalization and state-of-the-art materials made of both ceramic and resin play an increasingly important role:

Ivoclar Vivadent offers tailor-made products for chairside use. In addition to highly esthetic ceramic blocks, acrylate polymer blocks for the CAD/CAM manufacture of temporary restorations as well as a comprehensive, well-coordinated range of accessories are available.

CAD/CAM Blocks:

The extremely compact high-temperature sinter furnace Zenotec Fire Cube is designed as a desktop device and offers numerous advantages which make the sintering of framework ceramics such as zirconia or aluminum oxide much easier.

The Zenotec Fire P1 high-end-temperature sintering furnace has been specially configured for the various Ivoclar- / WIELAND materials and is supplied with a suitable set of firing programmes pre-installed.

The Programat CS is an easy-to-operate, small furnace for the dental office. It is particularly suitable for glaze and crystallization firing of IPS e.max CAD LT blocks. The furnace features 20 programs and is very easy to use. Because of its small dimensions, the furnace occupies very little space in the dental office. Thanks to the vacuum function, more complex firing cycles with high-quality results can be conducted.

• Variability: extensive and expandable range of materials and applications
• Speed:
  • high building speed independent of the number of elements to be produced
  • user-friendly display for fast and easy access regarding all important functions
• Efficiency: thanks to unique cartridge system
  • change of materials within a few seconds
  • low level of material consumption
  • long shelf life of materials
• Openness: “open STL file” device for all dental software solutions

For surgical guides, partial frameworks, crown & bridge, inlays / onlays and individual tooth or quadrant working models, the PICO 2 and PRO series are a greate productivity enhancing tool for dental applications.

With superior resolution and accuracy in X and Y, 1 micron increments in Z and high powered LED’s for super fast print times make our line of 3D printers the ideal choice for the digital dental lab. The PICO 2 can produce up to 20 copings & 16 crowns in under 3hrs with the PRO series offering a large build area for large parts.

For surgical guides, partial frameworks, crown & bridge, inlays / onlays and individual tooth or quadrant working models, the PICO 2 and PRO series are a greate productivity enhancing tool for dental applications.

With superior resolution and accuracy in X and Y, 1 micron increments in Z and high powered LED’s for super fast print times make our line of 3D printers the ideal choice for the digital dental lab. The PICO 2 can produce up to 20 copings & 16 crowns in under 3hrs with the PRO series offering a large build area for large parts.